Oxidation Stability
Dry Bath
Oxidation stability is determined by exposing the sample to a measured oxygen flow at elevated temperature in the presence of metal catalysts. Complete with solid…
Oxidation Stability
Oil Bath
As per IS:335, ASTM D2440 test method.
12/24 Place aluminum alloy dry bath.Super engineered & designed having required holes (12/24) well machined to accept oxidation tubes.
Ageing
Oven
As per IS:12177-1987, Method A. Oxidative ageing test by open beaker method. Microprocessor based PID temperature controller with pre-setting digital timer.
Gassing
Tendency
This International standard measures the tendency of insulating liquids to evolve or absorb gas when subjected in cells having specific geometrics,…
Breakdown
Voltage
0-100 KV oil test set in accordance with IEC 60156 with automatic voltage control. Output Voltage : 50 – 0 – 50 KV. i.e. 100 Kv across sample.(Voltage rise Programmable)
Oxidation Stability By Rotating Pressure Vessel Method
These methods used to evaluate the oxidation stability of new and in-service engine, turbine and insulating oils in the presence of water and a copper catalyst.
Viscosity
Bath
Kinematic viscosity is of primary importance in the design and selection of a wide range of petroleum products. Calibrated capillary visco meters are used…
Low Temperature Viscosity Bath
Double walled construction with inner cylindrical Dewar flask and outer metal casing with toughened glass window provided on the front side…
Cloud & Pour Point Tester
Cloud & pour point are indicators of the lowest temperature of utility for petroleum products. The sample is periodically examined while it is being cooled in the cloud & pour point apparatus.
Corrosive Sulphur Test Oven
Triple walled construction. Cross flow air circulation. Microprocessor based PID temperature controller with pre-setting digital timer. Safety thermostat.