Grease Industry

Grease Worker

Prolonged worked penetration test to determine consistency of Lubricating Greases. Equipped with presetting digital counter that automatically shuts off the drive motor after any desired…

Emcor Rust Test

Measures the ability of a grease to protect a bearing against corrosion in the presence of water. Two sets of grease-coated bearings per station are partially…

Leakage Tendencies of Wheel Bearing Grease

Evaluates the tendency of automotive wheel bearing grease to separate oil or grease under prescribed laboratory conditions The test is performed at elevated temperature in …

Roll Stability Of Lubricating Grease

Single and dual speed.This test is intended to subject lubricating greases to such a shear stresses as are typical of ball and roller bearings.A sample of the…

Drop Melting Point

This method covers the determination of the drop melting point of petroleum jelly. It is used primarily for petroleum and other micro crystalline jelly…

Drop Point Of Grease

Dropping point determinations are used for identification and quality control purposes and can be an indication of the highest temperature of utility…

Salt Spray Test Chamber

Cabinet constructed from non-corrodible high temperature resistant glass reinforced plastic. Acrylic cover is provided. Constructed in fiber-reinforced plastic, 10 mm thick with stiffners at…

Oxidation Stability Bath

This method covers the determination of the resistance of lubricating greases to oxidation when stored under static conditions for long period of time.

Heat Stability Of Greases

For measuring the oil which separates from a lubricating grease during storage in cans or drums. Four bleeding cells. Common pressure indicator, pressure relief valve and gas tubing.

Gas Evolution Test Apparatus

Suitable for measuring the gas evolved from a threaded compound at an elevated temperature. Consist of stainless steel bomb, stainless steel tubing, 2 way stainless steel valves…

WATER WASHOUT OF LUBRICATING GREASE

Comprises of tank assembly, electric heater, digital temperature controller, test bearing housing, circulating fluid pump with a supply pressure and a return suction line…

Oil Separation (During Storage)

Determines the tendency of lubricating grease to separate oil during storage. Consists of pressure bleeding test cells with air pressure regulator system and constant temperature air cabinet.

Corrosion Preventive

This test method covers the determination of the corrosion preventive properties of greases using grease-lubricated…

Copper Corrosion Oven

Determines the tendency of lubricating grease to corrode copper at elevated temperature.Greases are tested in a circulating air oven using test…

Deleterious Particles

Evaluates deleterious particle contamination in lubricating greases. Complete with plastic test plate, calibrated spring with scale.

High Temp Wheel Bearing Grease Tester

This test method covers a laboratory procedure for evaluating the high-temperature life performance of wheel bearing greases when…

Oil Separation

Evaluates the tendency of oil and lubricating grease to separate at an elevated temperature.Consists of 60 mesh cone with wire handle. 200ml glass beaker & cover with hook.

Penetrometer

This test method cover procedure for measuring the consistency of lubricating greases by the penetration of a cone of specified dimensions, mass & finish…

DROPPING POINT OF GREASE

The dropping point test permits higher temperature than the ASTM D-566 method and uses a different heating procedure; the test cell is inserted in an aluminum block…